Match the torque cell to the connection.

Flange and hollow Reaction Torque Sensors, square-drive torque load cells, shaft-coupled static torque transducers and combined Fz/Mz sensing.

01 / MT-RTS-FLG

Flange-to-flange

0.5–5,000 Nm

Motor stator and valve actuator test stands 02 / MT-RTS-JNT

Hollow robotic joint

1–500 Nm

Humanoid, exoskeleton and surgical robot joints 03 / MT-RTS-SQ

Square drive & hex

1–2,000 Nm

Torque-tool and fastener calibration fixtures 04 / MT-RTS-SHF

Keyed shaft

0.1–1,000 Nm

Bearing friction and low-torque component tests 05 / MT-RTS-FZ

Thrust + torque

1–1,000 Nm + 100 N–50 kN

Drilling, tapping and fastener preload correlation

REQUEST QUOTE / CAD

Start with your load and mounting envelope.

Send the installation constraints. We will review the sensor configuration, drawing, calibration scope and commercial quotation.

Prefer email? inquiry@reactiontorque.com

Please send non-confidential specifications first. CAD is supplied for the agreed configuration after engineering review.

Full nameWork emailCompanyMechanical coupling styleTarget torque capacity, with unitsMax OD & required center hole IDReadout & electronics preferenceProject quantity

Calibration & kit options5-point CW & CCW calibration — request NIST traceability documentationPre-calibrated torque amplifier (+$165 budget)Digital torque meter with peak hold (+$210 budget)Biaxial Fz + Mz dual-bridge upgrade (+$450 budget)

Budget add-on increments from the project brief, subject to configuration and written quotation. Calibration traceability and uncertainty must be confirmed for the ordered range.

Application & load cycle

By sending, you agree to our privacy notice. We use your details to respond to this engineering request.